Power Tongs

The Universe line of Power Tongs are used on drilling rigs to screw and unscrew tubing or casing to a specific torque. The unit is designed and built to be sturdy and provide many reliable years of operation.

Features

Jaw Biting System

  • Two jaw biting system with wraparound dies for 7-5/8 inch and smaller
  • Three jaw biting system with 6 dies for casing tongs 9-5/8 inch and larger

 

Built-In Spring Hanger

  • Built in spring hanger for movements during makeup or breakout with adjustable tong leveling system

 

Torque Speed Control

  • Two position hi-low torque speed control using a high-efficient hydraulic vane motor

 

Additional Features

  • Optional door safety interlock available
  • Modular handles that can be placed to suit customer

 

Patents

  • Canadian Patents: 2,016,319, 2,705,468, & 2,706,500, 2,742,881
  • US Patents: 5,144,868, & 8,418,586 B2, 8,443,700, 9,010,219 & 10,745,982 B2,

Brochures

Sizes & Specifications

Specifications
Torque at 2,500 psi (17,237 kPa)
Low Gear 15,000 ft-lbs [Max] (20,337 N-m)
High Gear 3,875 ft-lbs (5,254 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 18 RPM
High Gear 71 RPM
Speed at 65 GPM (246 LPM)
Low Gear 26 RPM
High Gear 102 RPM
Jaws Available
Wrap-Around Dies 2-3/8 in to 5-1/2 in (60.3 mm to 139.7 mm)
Insert Dies 2-3/8 in to 5-1/2 in (60.3 mm to 139.7 mm)
Tong Dimensions
Length 45 in (1.14 m)
Overall Width 31-1/4 in (0.79 m)
Width (No Handles) 24-1/2 in (0.62 m)
Torque Arm 26 in (0.66 m)
Weight 850 lbs (385 kg)
Tong Dimensions with Hydraulic Backup
Length 45 in (1.14 m)
Width (No Handles) 26-1/4 in (0.67 m)
Torque Arm 24 in (0.61 m)
Weight 1,700 lbs (771 kg)
Clearance
(Between Jaws)		 5-5/8 in to 18-3/4 in (142.9 mm to 476.3 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,650 psi (18,271 kPa)
Low Gear 25,000 ft-lbs [Max] (33,895 N-m)
High Gear 6,450 ft-lbs (8,745 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 11 RPM
High Gear 41 RPM
Speed at 65 GPM (246 LPM)
Low Gear 15 RPM
High Gear 60 RPM
Jaws Available
Insert Dies 2-3/8 in to 5-1/2 in (60.3 mm to 139.7 mm)
Tong Dimensions
Length 45 in (1.14 m)
Overall Width 31-1/4 in (0.79 m)
Width (No Handles) 24-1/2 in (0.62 m)
Torque Arm 26 in (0.66 m)
Weight 1,000 lbs (454 kg)
Tong Dimensions with Hydraulic Backup
Length 45 in (1.14 m)
Width (No Handles) 26-1/4 in (0.67 m)
Torque Arm 24 in (0.61 m)
Weight 1,900 lbs (862 kg)
Clearance
(Between Jaws)		 5-5/8 in to 18-3/4 in (142.9 mm to 476.3 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,500 psi (17,237 kPa)
Low Gear 14,125 ft-lbs (19,151 N-m)
High Gear 3,650 ft-lbs (4,949 N-m)
Torque at 3,000 psi (20,684 kPa)
Low Gear 17,000 ft-lbs [Max] (23,049 N-m)
High Gear 4,375 ft-lbs (5,932 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 19 RPM
High Gear 75 RPM
Speed at 65 GPM (246 LPM)
Low Gear 28 RPM
High Gear 108 RPM
Jaws Available
Insert Dies 2-3/8 in to 7-5/8 in (60.3 mm to 193.7 mm)
Wrap-Around Dies 2-3/8 in to 7-5/8 in (60.3 mm to 193.7 mm)
Tong Dimensions
Length 46-1/2 in (1.18 m)
Overall Width 26 in (0.66 m)
Width (No Handles) 22 in (0.56 m)
Torque Arm 28 in (0.71 m)
Weight 1,100 lbs (499 kg)
Tong Dimensions with Hydraulic Backup
Length 46-1/2 in (1.18 m)
Width (No Handles) 23-3/4 in (0.60 m)
Torque Arm 24 in (0.61 m)
Weight 2,000 lbs (907 kg)
Clearance
(Between Jaws)		 9 in to 20-3/4 in (228.6 mm to 527.1 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,750 psi (18,961 kPa)
Low Gear 30,000 ft-lbs [Max] (40,674 N-m)
High Gear 7,750 ft-lbs (10,507 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 9 RPM
High Gear 34 RPM
Speed at 65 GPM (246 LPM)
Low Gear 13 RPM
High Gear 49 RPM
Jaws Available
Insert Dies 2-3/8 in to 7-5/8 in (60.3 mm to 193.7mm)
Tong Dimensions
Length 50-3/4 in (1.29 m)
Overall Width 34-1/2 in (0.88 m)
Width (No Handles) 28-1/2 in (0.72 m)
Torque Arm 30 in (0.76 m)
Weight 1,250 lbs (567 kg)
Tong Dimensions with Hydraulic Backup
Length 50-3/4 in (1.29 m)
Width (No Handles) 28-1/2 in (0.72 m)
Torque Arm 24 in (0.61 m)
Weight 2,200 lbs (998 kg)
Clearance
(Between Jaws)		 11-1/8 in to 24-1/4 in (282.6 mm to 616.0 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,300 psi (15,858 kPa)
Low-Low Gear 30,000 ft-lbs [Max] (40,675 N-m)
Low-High Gear 15,000 ft-lbs (20,337 N-m)
High-Low Gear 7,750 ft-lbs (10,507 N-m)
High-High Gear 3,875 ft-lbs (5,254 N-m)
Speed at 45 GPM (170 LPM)
Low-Low Gear 7.5 RPM
Low-High Gear 15 RPM
High-Low Gear 29 RPM
High-High Gear 57.5 RPM
Speed at 65 GPM (246 LPM)
Low-Low Gear 11 RPM
Low-High Gear 21 RPM
High-Low Gear 41.5 RPM
High-High Gear 83 RPM
Jaws Available
Insert Dies 2-3/8 in to 7-5/8 in (60.3 mm to 193.7mm)
Tong Dimensions
Length 50-3/4 in (1.29 m)
Overall Width 34-1/2 in (0.88 m)
Width (No Handles) 28-1/2 in (0.72 m)
Torque Arm 30 in (0.76 m)
Weight 1,400 lbs (635 kg)
Tong Dimensions with Hydraulic Backup
Length 50-3/4 in (1.29 m)
Width (No Handles) 28-1/2 in (0.72 m)
Torque Arm 24 in (0.61 m)
Weight 2,350 lbs (1066 kg)
Clearance
(Between Jaws)		 11-1/8 in to 24-1/4 in (282.6 mm to 616.0 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,500 psi (17,237 kPa)
Low Gear 17,975 ft-lbs (24,371 N-m)
High Gear 4,650 ft-lbs (6,304 N-m)
Torque at 3,050 psi (21,029 kPa)
Low Gear 22,000 ft-lbs [Max] (29,828 N-m)
High Gear 5,675 ft-lbs (7,694 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 15 RPM
High Gear 57 RPM
Speed at 65 GPM (246 LPM)
Low Gear 21 RPM
High Gear 83 RPM
Jaws Available
Insert Dies 3-1/2 in to 9-5/8 in (88.9 mm to 244.5 mm)
Tong Dimensions
Length 50-3/4 in (1.29 m)
Overall Width 34-1/2 in (0.88 m)
Width (No Handles) 28-1/2 in (0.72 m)
Torque Arm 30 in (0.76 m)
Weight 1,050 lbs (476 kg)
Tong Dimensions with Hydraulic Backup
Length 50-3/4 in (1.29 m)
Width (No Handles) 32-3/8 in (0.82 m)
Torque Arm 24 in (0.61 m)
Weight 2,000 lbs (907 kg)
Clearance
(Between Jaws)		 11-1/8 in to 24-1/4 in (282.6 mm to 616.0 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,450 psi (16,892 kPa)
Low Gear 27,000 ft-lbs [Max] (36,607 N-m)
High Gear 6,975 ft-lbs (9,457 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 9 RPM
High Gear 34 RPM
Speed at 65 GPM (246 LPM)
Low Gear 13 RPM
High Gear 49 RPM
Jaws Available
Insert Dies 3-1/2 in to 9-5/8 in (88.9 mm to 244.5 mm)
Tong Dimensions
Length 50-3/4 in (1.29 m)
Overall Width 34-1/2 in (0.88 m)
Width (No Handles) 28-1/2 in (0.72 m)
Torque Arm 30 in (0.76 m)
Weight 1,200 lbs (544 kg)
Tong Dimensions with Hydraulic Backup
Length 50-3/4 in (1.29 m)
Width (No Handles) 32-3/8 in (0.82 m)
Torque Arm 24 in (0.61 m)
Weight 2,200 lbs (998 kg)
Clearance
(Between Jaws)		 11-1/8 in to 24-1/4 in (282.6 mm to 616.0 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,100 psi (14,479 kPa)
Low-Low Gear 27,000 ft-lbs [Max] (36,607 N-m)
Low-High Gear 13,500 ft-lbs (18,303 N-m)
High-Low Gear 6,975 ft-lbs (9,457 N-m)
High-High Gear 3,475 ft-lbs (4,711 N-m)
Speed at 45 GPM (170 LPM)
Low-Low Gear 7.5 RPM
Low-High Gear 15 RPM
High-Low Gear 29 RPM
High-High Gear 57.5 RPM
Speed at 65 GPM (246 LPM)
Low-Low Gear 11 RPM
Low-High Gear 21.5 RPM
High-Low Gear 41.5 RPM
High-High Gear 83 RPM
Jaws Available
Insert Dies 3-1/2 to 9-5/8 in (88.9 mm to 244.5 mm)
Tong Dimensions
Length 50-3/4 in (1.29 m)
Overall Width 34-1/2 in (0.88 m)
Width (No Handles) 28-1/2 in (0.72 m)
Torque Arm 30 in (0.76 m)
Weight 1,350 lbs (612 kg)
Tong Dimensions with Hydraulic Backup
Length 50-3/4 in (1.29 m)
Width (No Handles) 32-3/8 in (0.82 m)
Torque Arm 24 in (0.61 m)
Weight 2,350 lbs (1,066 kg)
Clearance
(Between Jaws)		 11-1/8 in to 24-1/4 in (282.6 mm to 616.0 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,500 psi (17,237 kPa)
Low Gear 19,550 ft-lbs (26,506 N-m)
High Gear 5,050 ft-lbs (6,847 N-m)
Torque at 3,200 psi (22,063 kPa)
Low Gear 25,000 ft-lbs [Max] (33,895 N-m)
High Gear 6,450 ft-lbs (8,745 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 13 RPM
High Gear 51 RPM
Speed at 65 GPM (246 LPM)
Low Gear 19 RPM
High Gear 74 RPM
Jaws Available
Insert Dies 3-1/2 in to 13-5/8 in (88.9 mm to 346.2 mm)
Tong Dimensions
Length 54-5/8 in (1.39 m)
Overall Width 37-5/8 in (0.96 m)
Width (No Handles) 31-3/4 in (0.81 m)
Torque Arm 32 in (0.81 m)
Weight 1,175 lbs (533 kg)
Tong Dimensions with Hydraulic Backup
Length 54-5/8 in (1.39 m)
Overall Width 38-1/4 in (0.97 m)
Torque Arm 25 in (0.64 m)
Weight 2,325 lbs (1,055 kg)
Clearance
(Between Jaws)		 11-1/8 in to 24-1/4 in (282.6 mm to 616.0 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,450 psi (16,892 kPa)
Low Gear 36,000 ft-lbs [Max] (48,809 N-m)
High Gear 9,300 ft-lbs (12,609 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 7 RPM
High Gear 26 RPM
Speed at 65 GPM [Max] (246 LPM)
Low Gear 10 RPM
High Gear 37 RPM
Jaws Available
Insert Dies 3-1/2 in to 13-5/8 in (88.9 mm to 346.2 mm)
Tong Dimensions
Length 54-5/8 in (1.39 m)
Overall Width 37-5/8 in (0.96 m)
Width (No Handles) 31-3/4 in (0.81 m)
Torque Arm 32 in (0.81 m)
Weight 1,325 lbs (601 kg)
Tong Dimensions with Hydraulic Backup
Length 54-5/8 in (1.39 m)
Overall Width 38-1/4 in (0.97 m)
Torque Arm 25 in (0.64 m)
Weight 2,475 lbs (1,123 kg)
Clearance
(Between Jaws)		 11-1/8 in to 24-1/4 in (282.6 mm to 616.0 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,450 psi (16,892 kPa)
Low-Low Gear 36,000 ft-lbs [Max] (48,809 N-m)
Low-High Gear 18,000 ft-lbs (24,404 N-m)
High-Low Gear 9,300 ft-lbs (12,609 N-m)
High-High Gear 4,650 ft-lbs (6,304 N-m)
Speed at 45 GPM (170 LPM)
Low-Low Gear 7 RPM
Low-High Gear 13 RPM
High-Low Gear 26 RPM
High-High Gear 51 RPM
Speed at 65 GPM [Max] (246 LPM)
Low-Low Gear 10 RPM
Low-High Gear 19 RPM
High-Low Gear 37 RPM
High-High Gear 74 RPM
Jaws Available
Insert Dies 3-1/2 in to 13-5/8 in (88.9 mm to 346.2 mm)
Tong Dimensions
Length 54-5/8 in (1.39 m)
Overall Width 37-5/8 in (0.96 m)
Width (No Handles) 31-3/4 in (0.81 m)
Torque Arm 32 in (0.81 m)
Weight 1,400 lbs (635 kg)
Tong Dimensions with Hydraulic Backup
Length 54-5/8 in (1.39 m)
Overall Width 38-1/4 in (0.97 m)
Torque Arm 25 in (0.63 m)
Weight 2,625 lbs (1,191 kg)
Clearance
(Between Jaws)		 11-1/8 in to 24-1/4 in (282.6 mm to 616.0 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,500 psi (17,237 kPa)
Low Gear 23,075 ft-lbs (31,285 N-m)
High Gear 5,950 ft-lbs (8,067 N-m)
Torque at 3,250 psi (22,406 kPa)
Low Gear 30,000 ft-lbs [Max] (40,674 N-m)
High Gear 7,750 ft-lbs (10,507 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 11 RPM
High Gear 44 RPM
Speed at 65 GPM (246 LPM)
Low Gear 16 RPM
High Gear 63 RPM
Jaws Available
Insert Dies 5-1/2 in to 17 in (139.7 mm to 431.8 mm)
Tong Dimensions
Length 60-3/8 in (1.53 m)
Overall Width 44-3/4 in (1.14 m)
Width (No Handles) 37-3/4 in (0.96 m)
Torque Arm 36 in (0.91 m)
Weight 1,750 lbs (794 kg)
Tong Dimensions with Hydraulic Backup
Length 60-3/8 in (1.53 m)
Width (No Handles) 41-1/4 in (1.05 m)
Torque Arm 27 in (0.69 m)
Weight 3,100 lbs (1,406 kg)
Clearance (between jaws) 11-1/8 in to 24-1/4 in (282.6 mm to 616.0 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,450 psi (16,892 kPa)
Low Gear 41,000 ft-lbs [Max] (55,588 N-m)
High Gear 10,575 ft-lbs (14,338 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 6 RPM
High Gear 22 RPM
Speed at 65 GPM (246 LPM)
Low Gear 8 RPM
High Gear 32 RPM
Jaws Available
Insert Dies 5-1/2 in to 17 in (139.7 mm to 431.8 mm)
Tong Dimensions
Length 60-3/8 in (1.53 m)
Overall Width 44-3/4 in (1.14 m)
Width (No Handles) 37-3/4 in (0.96 m)
Torque Arm 36 in (0.91 m)
Weight 1,900 lbs (862 kg)
Tong Dimensions with Hydraulic Backup
Length 60-3/8 in (1.53 m)
Width (No Handles) 41-1/4 in (1.05 m)
Torque Arm 27 in (0.69 m)
Weight 3,250 lbs (1,474 kg)
Clearance (between jaws) 11-1/8 in to 24-1/4 in (282.6 mm to 616.0 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,500 psi (17,237 kPa)
Low Gear 27,200 ft-lbs (36,878 N-m)
High Gear 7,025 ft-lbs (9,524 N-m)
Torque at 3,450 psi (23,787 kPa)
Low Gear 37,700 ft-lbs [Max] (51,114 N-m)
High Gear 9,725 ft-lbs (13,185 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 10 RPM
High Gear 37 RPM
Speed at 65 GPM (246 LPM)
Low Gear 14 RPM
High Gear 54 RPM
Jaws Available
Insert Dies 7 in to 20 in (177.8 mm to 508 mm)
Tong Dimensions
Length 70-1/4 in (1.78 m)
Overall Width 50 in (1.27 m)
Width (No Handles) 43-3/4 in (1.11 m)
Torque Arm 42 in (1.07 m)
Weight 2,300 lbs (1,043 kg)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,450 psi (16,892 kPa)
Low Gear 50,000 ft-lbs [Max] (67,790 N-m)
High Gear 12,900 ft-lbs (17,490 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 5 RPM
Low Gear 19 RPM
Speed at 65 GPM (246 LPM)
Low Gear 7 RPM
Low Gear 27 RPM
Jaws Available
Insert Dies 7 in to 20 in (177.8 mm to 508 mm)
Tong Dimensions
Length 70-1/4 in (1.78 m)
Overall Width 50 in (1.27 m)
Width (No Handles) 43-3/4 in (1.11 m)
Torque Arm 42 in (1.07 m)
Weight 2,300 lbs (1,043 kg)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,500 psi (17,237 kPa)
Low Gear 31,300 ft-lbs (42,437 N-m)
High Gear 8,075 ft-lbs (10,948 N-m)
Torque at 3,400 psi (23,442 kPa)
Low Gear 42,700 ft-lbs [Max] (57,893 N-m)
High Gear 11,025 ft-lbs (14,948 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 8 RPM
High Gear 32 RPM
Speed at 65 GPM (246 LPM)
Low Gear 12 RPM
High Gear 47 RPM
Jaws Available
Insert Dies 8-5/8 in to 24-1/2 in (190.5 mm to 622.3 mm)
Tong Dimensions
Length 78 in (1.98 m)
Overall Width 56-1/4 in (1.43 m)
Width (No Handles) 49-3/4 in (1.26 m)
Torque Arm 48 in (1.22 m)
Weight 3,550 lbs (1,610 kg)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,400 psi (16,548 kPa)
Low Gear 56,000 ft-lbs [Max] (75,925 N-m)
High Gear 14,450 ft-lbs (19,591 N-m)
Speed at 45 GPM (170 LPM)
Low Gear 4 RPM
High Gear 16 RPM
Speed at 65 GPM (246 LPM)
Low Gear 6 RPM
High Gear 23 RPM
Jaws Available
Insert Dies 7-1/2 in to 24-1/2 in (190.5 mm to 622.3 mm)
Tong Dimensions
Length 78 in (1.98 m)
Overall Width 56-1/4 in (1.43 m)
Width (No Handles) 49-3/4 in (1.26 m)
Torque Arm 48 in (1.22 m)
Weight 3,700 lbs (1,678 kg)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,500 psi (17,237 kPa)
Low Gear 11,100 ft-lbs (15,050 N-m)
High Gear 2,875 ft-lbs (3,898 N-m)
Torque at 3,000 psi (20,684 kPa)
Low Gear 13,000 ft-lbs [Max] (17,626 N-m)
High Gear 3,400 ft-lbs (4,610 N-m)
Speed at 65 GPM (246 LPM)
Low Gear 35 RPM
High Gear 135 RPM [Max]
Jaws Available
Insert Dies 1-5/16 in to 7 in (33.3 mm to 177.8 mm)
Tong Dimensions
Length 52 in (1.32 m)
Overall Width 18 in (0.46 m)
Torque Arm 40 in (1.02 m)
Weight 1,100 lbs (498 kg)
Maximum Elevator Diameter 32 in (0.81 m)
Space Required on Pipe Without Backup 8-1/8 in (0.21 m)
Space Required on Pipe With Backup 15-3/8 in (0.39 m)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.

Specifications
Torque at 2,500 psi (17,237 kPa)
Low Gear 11,100 ft-lbs (15,050 N-m)
High Gear 2,875 ft-lbs (3,898 N-m)
Torque at 3,000 psi (20,684 kPa)
Low Gear 13,000 ft-lbs [Max] (17,626 N-m)
High Gear 3,400 ft-lbs (4,610 N-m)
Speed at 65 GPM (246 LPM)
Low Gear 35 RPM
High Gear 135 RPM [Max]
Jaws Available
Insert Dies 1-5/16 in to 7 in (33.3 mm to 177.8 mm)
Tong Dimensions
Length 52 in (1.32 m)
Overall Width 18 in (0.46 m)
Torque Arm 40 in (1.02 m)
Weight 1,100 lbs (498 kg)
Maximum Elevator Diameter 32 in (0.81 m)
Space Required on Pipe Without Backup 8-1/8 in (0.21 m)
Space Required on Pipe With Backup 15-3/8 in (0.39 m)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.
Please contact us today to discuss your requirements.