UNI Web Header 2016 12 09

24-1/2" Casing Tong

CASING TONG 24.5 Tong 1 FINAL Small Feb 4 2015


CASING TONG 24.5 Tong 2 FINAL Small Feb 4 2015

Specifications

Torque at 2,500 psi (17,237 kPa)
Low Gear 29,300 ft-lbs (4,051 kg-m)
High Gear 7,550 ft-lbs (1,044 kg-m)
Maximum torque at 3,400 psi (23,442 kPa)
Low Gear 40,000 ft-lbs (5,530 kg-m)
High Gear 10,275 ft-lbs (1,420 kg-m)
Maximum speed at 65 GPM (246 LPM)
Low Gear 12 RPM
High Gear 49 RPM
pdf button Torque and Speed Chart (Last updated January 14, 2015)
Jaws available with insert dies
24-1/2” to 7-1/2” (622.3 mm to 190.5 mm)

Tong Dimensions

Length 78” (1.98 m)
Overall Width 49-3/4” (1.26 m)
Torque Arm 48” (1.22 m)
Weight 3,550 lbs (1,608 kg)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.
pdf button Casing Tong Brochure (Last updated March 31, 2016)