UNI Web Header 2016 12 09

13-5/8" Casing Tong (UPG)

CASING TONG 13.63 Tong FINAL Small Feb 4 2015
 
CASING TONG 13.63 Tong with Backup FINAL Small Feb 4 2015
 pdf button Torque and Speed Chart 

Specifications

    
Torque at 2,450 psi (16,892 kPa)
Low Gear 36,000 ft-lbs [Max]
(4,977 kg-m)		  
High Gear 9,290 ft-lbs
(1,284 kg-m)		  
Speed at 45 GPM (170 LPM)
Low Gear 7 RPM  
High Gear 26 RPM  
Speed at 65 GPM [Max] (246 LPM)
Low Gear 10 RPM  
High Gear 37 RPM  
Torque and Speed Charts
Jaws Available
Insert Dies 2-3/8 in to 13-5/8 in
(60.3 mm to 339.7 mm)		  

Tong Dimensions
Length 53-1/4 in
(1.35 m)		  
Overall Width 31-3/4 in
(0.81 m)		  
Torque Arm 32 in
(0.86 m)		  
Weight 1,225 lbs
(556 kg)		  

Tong Dimensions With Hydraulic Backup
Length 53-1/4 in
(1.35 m)		  
Overall Width 38-1/4 in
(0.97 m)		  
Torque Arm 25 in
(0.63 m)		  
Weight 2,325 lbs
(1,054 kg)		  
Clearance
(Between Jaws)		 11-1/8 in to 24-1/4 in
(282.6 mm to 616.0 mm)		  

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.