UNI Web Header 2016 12 09

13-5/8" Casing Tong

CASING TONG 13.63 Tong FINAL Small Feb 4 2015 CASING TONG 13.63 Tong with Backup FINAL Small Feb 4 2015

Specifications

Torque at 2,500 psi (17,237 kPa)
  Low Gear 19,550 ft-lbs ((2,703 kg-m)
  High Gear 5,040 ft-lbs (697 kg-m)
Maximum torque at 3,200 psi (22,063 kPa)
  Low Gear 25,000 ft-lbs (3,456 kg-m)
  High Gear 6,450 ft-lbs (892 kg-m)
Maximum speed at 65 GPM (246 LPM)
  Low Gear 17 RPM  
  High Gear 75 RPM  
pdf button Torque and Speed Chart (Last updated January 21, 2015)
Jaws available with insert dies
    13-5/8” to 3-3/8” (339.7 mm to 85.7 mm)

Tong Dimensions

  Length 53-1/4” ((1.35 m)
  Overall Width 31-3/4” (0.81 m)
  Torque Arm 32” (0.86 m)
  Weight 1,175 lbs (545 kg)

Tong Dimensions With Hydraulic Backup

  Length 53-1/4” (1.35 m)
  Overall Width 38-1/4” (0.97 m)
  Torque Arm 24-3/4” (0.63 m)
  Weight 2,275 lbs (1,032 kg)
  Clearance
(Between Jaws)
11-1/8" to 24-1/4" (282.6 mm to 616.0 mm)

Notes

 
  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.
pdf button Casing Tong Brochure (Last updated March 31, 2016)