UNI Web Header 2016 12 09

7-5/8" Compact Casing Tong

CASING TONG 7.63 Tong FINAL Small Feb 2 2015 CASING TONG 7.63 Tong with Backup FINAL Small Feb 2 2015

Specifications

Torque at 2,500 psi (17,237 kPa)
  Low Gear 14,100 ft-lbs (1,949 kg-m)
  High Gear 3,600 ft-lbs (498 kg-m)
Maximum torque at 3,000 psi (20,684 kPa)
  Low Gear 17,000 ft-lbs (2,350 kg-m)
  High Gear 4,372 ft-lbs (604 kg-m)
Maximum speed at 65 GPM (246 LPM)
  Low Gear 25 RPM  
  High Gear 97 RPM  
pdf button Torque and Speed Chart (Last updated June 10, 2014)
Jaws available with insert dies
    7-5/8” to 5-1/2” (193.7 mm to 139.7 mm)
Jaws available with wrap around dies
    5-1/2” to 2-1/16” (139.7 mm to 52.4 mm)

Tong Dimensions

  Length 46-3/4” (1.19 m)
  Overall Width 22” (0.56 m)
  Torque Arm 28” (0.71 m)
  Weight 1,100 lbs (498 kg)

Tong Dimensions With Hydraulic Backup

  Length 46-3/4” (1.19 m)
  Overall Width 23” (0.58 m)
  Torque Arm 24” (0.61 m)
  Weight 1,775 lbs (805 kg)
  Clearance
(Between Jaws)
9" to 20-3/4" (228.6 mm to 527.1 mm)

Notes

 
  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.
pdf button Compact Casing Tong Brochure (Last updated September 4, 2013)