UNI Web Header 2016 12 09

9-5/8" Casing Tong (Upgrade)

CASING TONG 9.63 U Tong FINAL Small Jun 5 2015
CASING TONG 9.63 U Tong with Backup FINAL Small Jun 4 2015

Specifications

Maximum torque at 1,900 psi (13,100 kPa)
Low Gear27,000 ft-lbs(3,773 kg-m)
High Gear7,140 ft-lbs(987 kg-m)
Maximum speed at 45 GPM (170 LPM)
Low Gear7.5 RPM
High Gear29 RPM
Maximum speed at 65 GPM (246 LPM)
Low Gear11 RPM
High Gear42 RPM
pdf button Torque and Speed Chart (Last updated June 5, 2015)
Jaws available with insert dies
    9-5/8” to 3-3/8” (244.5 mm to 85.7 mm)

Tong Dimensions
  Length 49-1/4” (1.25 m)
  Overall Width 28-1/2” (0.72 m)
  Torque Arm 30” (0.76 m)
  Weight 1,150 lbs (522 kg)

Tong Dimensions With Hydraulic Backup
  Length 49-1/4” (1.25 m)
  Overall Width 32-3/8” (0.82 m)
  Torque Arm 24” (0.61 m)
  Weight 2,150 lbs (975 kg)
  Clearance
(Between Jaws)		 11-1/8" to 24-1/4" (282.6 mm to 616.0 mm)

Notes

  • Actual torque rating may vary on smaller sizes.
  • Torque arm is measured from the center of the pipe to the center of the back handle on the tong, and to the center of the load cell cradle on the backup.
  • All weights above are approximate and may very depending on jaws and accessories installed.
pdf button Casing Tong Brochure (Last updated March 31, 2016)